Ignore short-lived motion for NUMBER (0 to 10) seconds.Motion detection percentage NUMBER (1 to 99).Motion detection object size NUMBER (1 to 99).
Motion detection threshold NUMBER (1 to 99).Motion detection sensitivity NUMBER (1 to 99).Motion detection source STRING (-1:disable, 0:by camera, 1:by Surveillance Station).Motion detection channels (if available):.Continuous recording event SWITCH (read-only).Continuous Move/Zoom with START_ and STOP_ (e.g.PTZ (Pan/Tilt/Zoom) for PTZ cameras only:.Snapshot static live feed URI (mjpeg over http) STRING.Snapshot static live feed URI (rtsp) STRING.Snapshot dynamic URI (refreshes with event refresh rate) STRING.External event trigger NUMBER (1 to 10, write-only)Ĭurrently following Channels are supported on the Camera:.Refresh rate for motion detection parameter (defaults to 0 = no autorefresh)Ĭurrently following Channels are supported on the Bridge:.Refresh rate for all other Camera events and dynamic channels.( advanced) Enable support for self-signed / invalid SSL certificates (binding or openHAB restart required on change)įollowing options can be set for the Camera:.Refresh rate for DiskStation events (Home Mode).Password for the DiskStation / Surveillance Station.User name for the DiskStation / Surveillance Station.Configurationįollowing options can be set for the Bridge: If successful, your cameras will be found and can be added without further configuration. After entering correct credentials and updating the Bridge, automatic discovery for cameras will start.
For security reasons it's always a better practice to create a separate user for this. You should now configure the Bridge and enter your Surveillance Station credentials. You can now add its Bridge Thing, which will first be OFFLINE. If your openHAB installation is in the same network as your Synology DiskStation, the discovery will automatically find your Surveillance Station. One or many Things for supported Cameras.Bridge Thing representing the Synology DiskStation / Surveillance Station.Supported ThingsĬurrently following Things are supported: For further information please read release notes of a corresponding release. On major or structural changes existing things might have to be deleted and recreated, existing channels might be kept. Installation and upgradeįor an installation the latest release should be copied into the /addons folder of your openHAB installation.įor an upgrade the existing file should be overwritten. Your help and testing would be greatly appreciated but there is no stability or functionality warranty. This binding is currently under development.
This binding should work with any DiskStation capable of running Surveillance Station as well as with any supported camera. This binding connects openHAB with your surveillance cameras running on Synology© DiskStation using Synology Surveillance Station API.
0 kommentar(er)
